Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE |
| CSPY | LARGEST STEP DIAMETER | 1.247 INCHES MINIMUM AND 1.248 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| ATPC | STEP QUANTITY | 3 |
| AMDL | FIRST END DIAMETER | 0.8750 INCHES NOMINAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.938 INCHES NOMINAL |
| MATT | MATERIAL | NICKEL ALLOY |
| ABHP | OVERALL LENGTH | 13.063 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |